Difference between revisions of "InitMIP"
(→A2.2 Uploading your model output)
m (→A2.3 Model output variables and README file)
|Line 296:||Line 296:|
| Grounded ice sheet area fraction
| Grounded ice sheet area fraction
Revision as of 17:01, 17 August 2016
- 1 initMIP: Focus on initialization
- 2 Appendix 1 – Standard output grid definition and interpolation
- 3 Appendix 2 – Naming conventions, upload and model output data.
initMIP: Focus on initialization
Earlier large-scale Greenland ice sheet (GrIS) experiments e.g. those run during ice2sea and SeaRISE initiatives have shown that ice sheet initialisation can have a large effect on sea-level projections and gives rise to important uncertainties. Improving initialisation techniques is currently a field of active research, which makes it difficult to prescribe one technique as the method of choice for ISMIP6. Instead, we first propose a “Come as you are”- approach, which allows participants to contribute with their currently used model setup and initialisation technique for intercomparison (initMIP). This, we hope, allows getting modellers involved early in the ISMIP6 process and keeps the workload for participants as low as possible. Furthermore, the proposed schematic experiments may facilitate to document on-going model development. Starting early in the CMIP6 process implies relying on schematic forcing for the initiation experiments that is independent from CMIP6 AOGCM output, which will only become available later on. The initMIP is the first in a series of ISMIP6 ice sheet model inter comparison activities and the design of the experiment was led by Heiko Goelzer.
• Compare and evaluate the initialisation methods used in the ice sheet modelling community
• Estimate uncertainty associated with initialisation
• Get the ice sheet modelling community started with ISMIP6 activities
• Document on-going model development, as the simple experiments could be repeated with new model versions
initMIP Experimental setup
Experiments are for the large scale GrIS and are designed to allow intercomparison between models of 1) the initial state itself and 2) the response in two schematic forward experiments:
1. init: Initialisation to present day with method of choice
2. Schematic forward experiments
2a. ctrl: Unforced control run (100 years)
2b. asmb: Prescribed schematic surface mass balance anomaly (100 years)
The two forward experiments serve to evaluate the initialisation in terms of model drift (2a, ctrl) and response to a large perturbation (2b, asmb). For 2a, the models are run forward without any anomaly forcing, such that whatever surface mass balance (SMB) was used in the initialization technique would continue unchanged. The perturbation in 2b consists of a given surface mass balance anomaly, which has to be applied relative to the initial SMB inherent to the individual initialisation technique. The SMB anomaly in 2b (the same for each model) is schematic and should not be considered as a realistic projection. The core experiment duration is set to 100 years.
Requirements for the experiments:
• Participants can and are encouraged to contribute with different models and/or initialisation methods
• Models have to be able to prescribe a given SMB anomaly
• No adjustment of SMB due to geometric changes in forward experiments (i.e. no elevation – SMB feedback is allowed)
• No bedrock adjustment in forward experiment
• The choice of model input data is unconstrained to allow participants the use of their preferred model setup without modification. Modelers without preferred data set choice can have a look at the ISMIP6 wiki for possible options: http://www.climate-cryosphere.org/wiki/index.php?title=Datasets
• The specific year of initialization (between 1950 and 2014) is equally unconstrained to allow the use of different observational data sets that may be tied to certain time periods.
The SMB anomaly can be obtained via the ISMIP6 ftp server (email firstname.lastname@example.org to obtain the log in information), and was prepared by Heiko Goelzer. Modeling groups should use the 1km version to conservatively interpolate to their model native grid (see Appendix 1, below). Files of lower resolution (5km, 10km, and 20km) are provided for groups using the standard output grid (Bamber et al., 2001) as “native grid”. For 2b, the SMB anomaly is to be implemented as a time dependent function, that takes the form of a linear function which increases stepwise every full year (it is therefore independent of the time step in the model):
SMB(t) = SMB_initialization + SMB_anomaly * (floor (t) / 40); for t in year from 0 to 40
SMB(t) = SMB_initialization + SMB_anomaly * 1.0; for t > 40 years
where SMB_anomaly is the anomaly provided by ISMIP6 and SMB_initialization is the SMB used for the initialization. The units of SMB_anomaly are (meter ice equivalent/year) with an assumed density of 910 kg/m^3 and 31556926 s/yr.
initMIP Specific uncertainty analysis
At a later stage and informed by the diversity and similarities of participating models, ISMIP6 will suggest further experiments to explicitly address certain aspects of uncertainty in the initialisation. It is hoped that participating groups will contribute to these additional experiments, which apply specific perturbations to the initialisations. These would take the form of repeating the experiments with systematic perturbations of the initialization choices, for example:
– Boundary conditions and other datasets
– Model structure
– Methods and judgments, e.g. tolerance for data mismatch or drift
Bamber, J. L., Layberry, R. L., and Gogineni, S.: A new ice thickness and bed data set for the Greenland ice sheet 1. Measurement, data reduction, and errors, J. Geophys. Res.-Atmos., 106, 33773–33780 (2001).
Bamber, J.L., Griggs, J.A., Hurkmans, R.T.W.L., Dowdeswell, J. A., Gogineni, S. P., Howat, I., Mouginot, J., Paden, J., Palmer, S., Rignot, E., and Steinhage, D.: A new bed elevation dataset for Greenland. Cryosphere 7, 499–510 (2013).
Appendix 1 – Standard output grid definition and interpolation
All 2D data is requested on a standard regular grid with the following description. Polar stereo-graphic projection with standard parallel at 71° N and a central meridian of 39° W (321° E) on datum WGS84. The lower left corner is at (-800000 m, -3400000 m) and the upper right at (700000 m, -600000 m). This is the same grid (Bamber et al., 2001) used to provide the SMB anomaly forcing. The output should be submitted on a resolution adapted to the resolution of the model and can be 20 km, 10 km, 5 km, or 1 km. The data will be conservatively interpolated to 1 km resolution for archiving and 5 km resolution for diagnostic processing by ISMIP6.
If interpolation is required in order to transform the SMB forcing grid (1km, same as Bamber et al. 2013) to your native grid, and transform your model variables to the initMIP output grid (20 km, 10 km, 5 km, 1 km, Bamber et al. 2001), it is required that conservative interpolation is used. The motivation for using a common method for all models is to minimize model to model differences due to the choice of interpolation methods. Examples of tools that have been tested by ISMIP6 members (along with tips) are available on the Regridding page.
Appendix 2 – Naming conventions, upload and model output data.
• one variable per file for all 2D fields
• all variables in one file for the scalar variables
• a completed readme file
A2.1 File name convention
File name convention for 2D fields:
File name convention for scalar variables:
File name convention for readme file:
<variable> = netcdf variable name (e.g. lithk)
<IS> = ice sheet (AIS or GIS)
<GROUP> = group acronym (all upper case or numbers, no special characters)
<MODEL> = model acronym (all upper case or numbers, no special characters)
<EXP> = experiment name (init, ctrl or asmb)
For example, a file containing the scalar variables for the Greenland ice sheet, submitted by group “JPL” with model “ISSM” for experiment “ctrl” would be called: scalar_GIS_JPL_ISSM_ctrl.nc
If JPL repeats the experiments with a different version of the model (for example, by changing the sliding law), it could be named ISSM2, and so forth.
A2.2 Uploading your model output
Please upload your model output on the FTP server cryoftp1.gsfc.nasa.gov, and email email@example.com for the user name and latest password. Note sftp does not work!
After log in, go to the ISMIP6/initMIP/output directory via:
ftp> cd /ISMIP6/initMIP/output
and create a directory named <GROUP> with the following sub-directory structure:
initMIP output/ <GROUP>/ <MODEL>/ init/ ctrl/ asmb/
Create additional <MODEL> directories when participating with more than one model or model version.
An example of model output files can be found in /ISMIP6/initMIP/output/ISMIP6/REF.
A2.3 Model output variables and README file
The README file is an important contribution to the initMIP submission. It may be obtained here or requested by email to ismip6-at-gmail.com
The variable requested in the table below serves to evaluate and compare the different models and initialization techniques. Some of the variables may not be applicable for your model, in which case they are to be omitted (with explanation in the README file).
Note that there has been a few tiny changes since the October document. These changes are so that the data request for initMIP is consistent with the ISMIP6 data request, the later changed under the direction of the WIP/CMIP6. The old standard names are kept in italic. Note that the binary masks are no longer requested, but instead we ask for area_fractions
Furthermore, we now distinguish between state variables (e.g. ice thickness, temperatures and velocities) and flux variables (e.g. SMB). State variables should be given as snapshot information at the end of one year (scalars) and five year periods (2D), while flux variables are to be averaged over the respective periods.
Example model output files can be found in /ISMIP6/initMIP/output/ISMIP6/REF on the ftp server.
Last update: 01 March 2016 by Heiko
|Variable||Dim||Variable Name||Standard Name||Units||Comment|
|2D variables requested as snapshots, every five years, starting at t=0|
|Ice thickness||x,y,t||lithk||land_ice_thickness||m||The thickness of the ice sheet|
|Surface elevation||x,y,t||orog||surface_altitude||m||The altitude or surface elevation of the ice sheet|
|Bedrock elevation||x,y,t||topg||bedrock_altitude||m||The bedrock topography (unchanged in forward exps.)|
|Geothermal heat flux||x,y||hfgeoubed||upward_geothermal_heat_flux_at_ground_level (was upward_geothermal_heat_flux_at_bedrock)||W m-2||Geothermal Heat flux (unchanged in forward exps.)|
|Surface mass balance flux||x,y,t||acabf||land_ice_surface_specific_mass_balance_flux||kg m-2 s-1||Surface Mass Balance flux|
|Basal mass balance flux||x,y,t||libmassbf||land_ice_basal_specific_mass_balance_flux||kg m-2 s-1||Basal mass balance flux|
|Ice thickness imbalance||x,y,t||dlithkdt||tendency_of_land_ice_thickness||m s-1||dHdt|
|Surface velocity in x||x,y,t||uvelsurf||land_ice_surface_x_velocity||m s-1||u-velocity at land ice surface|
|Surface velocity in y||x,y,t||vvelsurf||land_ice_surface_y_velocity||m s-1||v-velocity at land ice surface|
|Surface velocity in z||x,y,t||wvelsurf||land_ice_surface_upward_velocity (was land_ice_surface_z_velocity)||m s-1||w-velocity at land ice surface|
|Basal velocity in x||x,y,t||uvelbase||land_ice_basal_x_velocity||m s-1||u-velocity at land ice base|
|Basal velocity in y||x,y,t||vvelbase||land_ice_basal_y_velocity||m s-1||v-velocity at land ice base|
|Basal velocity in z||x,y,t||wvelbase||land_ice_basal_upward_velocity (was land_ice_basal_z_velocity)||m s-1||w-velocity at land ice base|
|Mean velocity in x||x,y,t||uvelmean||land_ice_vertical_mean_x_velocity||m s-1||The vertical mean land ice velocity is the average from the bedrock to the surface of the ice|
|Mean velocity in y||x,y,t||vvelmean||land_ice_vertical_mean_y_velocity||m s-1||The vertical mean land ice velocity is the average from the bedrock to the surface of the ice|
|Surface temperature||x,y,t||litempsnic||temperature_at_ground_level_in_snow_or_firn (was land_ice_temperature_at_snow_or_firn_base)||K||Ice temperature at surface|
|Basal temperature||x,y,t||litempbot||land_ice_basal_temperature||K||Ice temperature at base|
|Basal drag||x,y,t||strbasemag||magnitude_of_land_ice_basal_drag||Pa||Magnitude of basal drag|
|Calving flux||x,y,t||licalvf||land_ice_specific_mass_flux_due_to_calving (was land_ice_calving_flux)||kg m-2 s-1||Loss of ice mass resulting from iceberg calving. Only for grid cells in contact with ocean|
|Land ice area fraction||x,y,t||sftgif||land_ice_area_fraction||1||Fraction of grid cell covered by land ice (ice sheet, ice shelf, ice cap, glacier)|
|Grounded ice sheet area fraction||x,y,t||sftgrf||grounded_ice_sheet_area_fraction||1||Fraction of grid cell covered by grounded ice sheet, where grounded indicates that the quantity correspond to the ice sheet that flows over bedrock|
|Floating ice sheet area fraction||x,y,t||sftflf||floating_ice_sheet_area_fraction||1||Fraction of grid cell covered by ice sheet flowing over seawater|
|Grounded ice mask NO LONGER REQUESTED||x,y,t||gismask||grounded_ice_sheet_binary_mask||1||The binary mask is set to 1 where grounded ice sheet, 0 elsewhere|
|Ice shelf masks NO LONGER REQUESTED||x,y,t||fismask||floating_ice_shelf_binary_mask||1||The binary mask is set to 1 where ice shelves (land ice floating over sea), 0 elsewhere|
|Ice sheet mask NO LONGER REQUESTED||x,y,t||istmask||ice_sheet_binary_mask||1||The binary mask is set to 1 where ice sheet (grounded ice sheet and ice shelves), 0 elsewhere|
|Scalar outputs (time average, yearly). If possible, the t=0 value should contain a one year time average of the last year of the initialization.|
|Total ice mass||t||lim||land_ice_mass||kg||spatial integration, volume times density|
|Mass above floatation||t||limnsw||land_ice_mass_not_displacing_sea_water||kg||spatial integration, volume times density|
|Grounded ice area||t||iareag||grounded_land_ice_area||m^2||spatial integration|
|Floating ice area||t||iareaf||floating_ice_shelf_area (was floating_land_ice_area)||m^2||spatial integration|
|Total SMB flux||t||tendacabf||tendency_of_land_ice_mass_due_to_surface_mass_balance||kg s-1||spatial integration|
|Total BMB flux||t||tendlibmassbf||tendency_of_land_ice_mass_due_to_basal_mass_balance||kg s-1||spatial integration|
|Total calving flux||t||tendlicalvf||tendency_of_land_ice_mass_due_to_calving||kg s-1||spatial integration|